All content © 2015, cmotion GmbH. All specifications subject to change without notice. http://www.cmotion.eu
12/29
3. System Setup
This section will guide you through the compactLCS system setup. Starting with a quick setup,
then proceeding with the
compact
hand unit
s to
compact
camin
and
cforce
motors.
3.1. Mounting
cforce
and
cforce
mini
Motors
The
cforce
mini
motor is supplied with a height adjustable 19mm butterfly rod clamp. A 15mm
adapter is also included which can be clipped directly onto any 15mm rod before mounting and
securing the motor in position.
The regular
cforce
motor has 3 mounting options:
3.1.1. Rod bracket
The
cforce
can be mounted to 15 and19 mm diameter rods.
■
Slide the motor onto the rod.
■
Align the motor gear with the gear ring on the lens.
■
Connect the teeth on both rings and hold the motor in place while tightening the
clamp. Be careful not to over tighten the screw.
3.1.2. Rod-to-rod
To mount
cforce
on a secondary rod, use the cmotion Rod-to-Rod adapter.
3.1.3. Hill Bracket
cforce
can be mounted to a Hill bracket via the cmotion Hill bracket adapter.
Note
: When mounting motors make sure the lens scale isn’t set to either
limit before engaging the lens gear and calibrating.