AN118
Rev 1.1 | Page 4 / 31
www.cmostek.com
1. Getting Started
Install RFPDK on the computer. The detail of the installation can be found in Chapter 7 of “AN113 CMT2150A/2250(1)A One-Way
RF Link Development Kits User’s Guide”.
Setup the development kits as shown in Figure 1 before configuring the CMT2250A. The Application with CMT2250A can be
CMT2250A-EM V1.0 provided by CMOSTEK, or the PCB designed by the user with CMT2250A.
Figure 1. CMT2250A Configuration Setup
Start the RFPDK from the computer’s desktop and select CMT2250A in the Device Selection Panel shown in Figure 2. Once a
device is selected, the Device Control Panel appears as shown in Figure 3. Because the Advanced Mode covers all the
configurable features / parameters while the Basic Mode only contains a subset, the Advanced Mode is described in this
document.
Figure 2. Device Selection Panel
