3
INSTRUCTION MANUAL
WARNING
This R/C helicopter is not a toy and can result in serious
bodily harm, injury and property damage if misused.
Fly only in open areas and at preferably BMFA recognised
clubs and sites.
CONGRATULATIONS ON PURCHASING THE ORBITER OR VORTEX RTF HELICOPTER
Top Gun Park-Flite are proud to present this high performance model helicopter for your enjoyment. With
its co-axial contra rotating rotor system, twin motors and complex electronics, this model provides the
enthusiast with an easy to fly fully functional helicopter for indoor and outdoor use.
Supplied as a Ready to Fly package with transmitter, LiPo flight battery and charger, this model has been
designed with the utmost care and attention to detail to produce a light weight, strong and realistic looking
model with excellent flying characteristics.
These instructions assume a reasonable level of competence for both building and flying and we
recommend that the model is flown at a recognised club with frequency control measures and suitable third
party insurance.
The owner – pilot of this model should take note of regulations and local bylaws before flying this aircraft.
Please take time to read through these instructions before commencing assembly. We list operations in
order of works to reduce the risk of damage during assembly.
SPECIFICATIONS
ROTOR
DIAMETER:
345 MM (13.6”)
LENGTH:
400 MM (15.75”)
WEIGHT:
232 G (8.2 OUNCES)
RADIO:
4 FUNCTION 35MHZ PPM
2 QTY MICRO SERVOS
3 IN 1 GYRO, ESC & MIXER
4 CHANNEL RECEIVER
MOTOR:
TWIN 180 BRUSHED
7.4V 800MAH LIPO BATTERY
PLEASE READ THROUGH
THE WARNINGS BEFORE
USE.
A 7.4V 800 mAh lithium polymer
(LiPo) battery rated at 10C and
charger is included as part of this
package and these cells must be
operated with care to prevent the
risk of fire.
LiPo batteries are soft cased and
can be easily damaged by sharp
items, puncturing of the soft
casing can cause fires and we
recommend that they are stored
and handled carefully.
Use only a LiPo rated charger, set
to a maximum of 2 cells (7.4v)
and no more than 0.8 amp charge
current.
Always remove the battery from
the aircraft and charge on a non
flammable, non conductive
surface.
Due to continual and ongoing
product development the parts
shown in the manual may differ
from those supplied.
