CMi 466957, Operating Instructions Manual

Page: 55 / 213

5. Technical data
55
GB
466957 V_01/06/2010
38. It is imperative to observe the accident prevention regulations in force in your area as well as
all other generally recognized rules of safety.
39. Note the information published by your professional associations.
40. Position the blade guard so it is approx. 3 mm above the material you want to saw.
41. Important! Support long workpieces (e.g. with a roller table) to prevent them sagging at the end
of a cut.
42. Make sure the blade guard (10) is in its lower position when the saw is being transported.
43. Safety guards are not to be used to move or misuse the machine.
44. Blades that are misshapen or damaged in any way must not be used.
45. If the table insert is worn, replace it.
46. Never operate the machine if either the door protecting the blade or the detachable safety
device are open.
47. Ensure that the choice of blade and the selected speed are suitable for the material to be cut.
48. Do not begin cleaning the blade until it has come to a complete standstill.
49. In the case of straight sawing against the parallel stop, a push stick must be used.
50. The bandsaw blade guard should be in its lowest position close to the bench during transport.
51. For miter cuts when the table is tilted, the parallel stop must be positioned on the lower part of
the table.
52. When cutting round timber, use a suitable holding device to prevent the workpiece turning.
53. Never use guards to lift or transport items.
54. Ensure that the bandsaw blade guards are used and correctly adjusted.
55. Keep your hands a safety distance away from the bandsaw blade. Use a push stick for narrow
cuts.
5. Technical data
Pull the power plug before beginning
any repair or maintenance work!
Wear safety goggles
Wear ear-muffs
Wear a breathing mask
Voltage: 230 V~ / 50 Hz
Power: S1 180 W / S2 15 min 250 W
Ideal speed no: 1400 min
-1
Blade length: 1400 mm
Max. blade width: 8 mm
466957.book Seite 55 Donnerstag, 17. Juni 2010 8:53 08