CMi 462442, Original Operating Instructions, Page: 36 / 118

36
GB
• If fuel gets on your clothing, change your
clothing right away. Clean the garment before
wearing it again.
• Store fuels out of the reach of children.
If used improperly, fuels endanger the environ-
ment:
• Fill up fuel carefully. Fuel must not run into the
soil or into the sewer system.
• Fuel residues must be disposed of properly.
Never dispose of them with household waste.
• Fuels have a limited shelf-life. Only buy quanti-
ties that will be used within a few months.
Your product at a glance
Figure 1 – Page 3
1. Container
2. Tank cover
3. Spark plug connector
4. Flow regulator
(spraying granulate)
5. Cover (with strainer)
6. Air filter housing
7. Fuel cock
8. Pull-starter
9. Cold start lever
10. Earthing chain
11. Exhaust
12. Supply valve
13. Supply line
14. Control handle
15. Blow pipe
16. Setting screw (flow rate)
17. Nozzle head
Supplied as standard
Assembly
Mounting the blow pipes and hose (spraying li-
quids)
Figure 2 – Page 4
– Attach the control handle (14) to the centre
piece (B)using clamp (23).
– Connect the nozzle head (17) to the pipe (A).
– Fit the centre piece (B) to the flexible pipe
section (C).
– Connect the pipe (A) to the centre piece (B).
– Connect the assembled blow pipe to the pipe
section (F).
– Connect the supply line (13) to the connection
nozzle on the container (1).
– Attach the supply line (13) to the supply
valve (12).
– Guide the supply line (13) through the fixing
clamp and connect using the setting screw (16).
Mounting the blow pipes (spraying granulate)
Figure 3 – Page 4
– Attach the control handle (14) to the
extension (D) using clamp (23).
– Connect the pipe (A) to the extension (D).
– Connect the extension (D) to the adapter (E) and
mount on the flexible pipe section (C).
– Connect the assembled blow pipe to the pipe
section (F).
Mounting the earthing chain
Figure 4 – Page 5
Observe the mounting steps for the earthing chain
described here.
– Clamp the cable lug (A) on the earthing chain (10)
under the pipe clamp.
Using for the first time
Filling with fuel
• Instructions for use
• Sprayer
• Granulate insert
• Hose (2x)
• Control handle
• Earthing chain
• Spray head
• Cover (with strainer) • Tool
• Extension pipe
• Carrying strap
• Replacement spark
plug
• Seal set
• Filter for fluid contai-
ner
• Fuel container
Note: If a part is missing or damaged,
please contact the vendor.
Risk of injury! Fuel is explosive!
– Before refuelling, switch off the
motor and let it cool down.
– Closely observe all safety informa-
tion for handling fuel ( For handling
fuels – Page 35
).
Note: Specified fuel: Usable fuel-oil
mixture – Page 41 .
462442_Spruehnebler_Benzin.book Seite 36 Montag, 21. Dezember 2015 5:24 17