CMi 450185, Original Instructions Manual, Page: 22 / 64

22
Storage
– Clean unit before storing.
– Store the tool in a dry and well ventilated place.
Storing grinding tools
– Always store the grinding stone placed on an
even surface.
– Only store the grinding stone in dry and evenly
tempered, frost-free rooms.
– Protect the grinding stone from direct sunlight
during storage.
Troubleshooting
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Technical data
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks. Determination
of noise emission values in accordance with EN 60745-1.
Note: Unfavourable ambient conditions
during storage may accelerate the aging
process for grinding tools.
DANGER! Risk of injury! Unprofessional
repairs may mean that your device will no
longer operate safely. This endangers you
and your environment.
Error/Fault Cause Remedy
Device does not work No power supply? Check the cable, plug, and the fuse.
Insufficient sharpening performance Grinding stone too worn? Replace the grinding stone
(
►
Changing the grinding stone –
p. 21).
Item number 450 185
Nominal voltage 230 V~, 50 Hz
Capacity 95 W
Idle revolutions 1600 min
-1
Protection class II
Diameter of cutting disc ø75 mm
Drill sizes 3–12 mm
Protection type IP20
Noise output level (L
WA
)* 75 dB(A)
(K = 3 dB(A))
Noise pressure level (L
WA
)* 64 dB(A)
(K = 3 dB(A))
GB
Bohrerschaerfgeraet_450185.book Seite 22 Donnerstag, 3. November 2016 12:15 12