CMi 450185 Original Instructions Manual Download Page 20

Page: 20 / 64

• Do not touch the mains plug with wet hands!

Always pull out the mains plug at the plug and
not by the cable.

• Do not bend, crush, pull or drive over the power

cable, protect from sharp edges, oil and heat.

• Do not lift the device using the cable or use the

cable for purposes other than intended.

• Check the plug and cable before each use.
• If the power cable is damaged immediately dis-

connect the plug. Never use the device if the
power cable is damaged.

• If the device is not in use make sure the plug is

pulled out.

• Make sure that the device is switched off before

plugging in the mains cable.

• Make sure that the device is switched off before

unplugging it.

• Disconnect the power supply before transport-

ing the device.

Maintenance

• Before conducting any maintenance on the

device, disconnect the mains plug.

• Only those maintenance and fault elimination

tasks described here may be carried out. Any
other tasks must be completed by a specialist.

• Only use original replacement parts. Only these

replacement parts are designed and suitable for
the device. Other replacement parts will not only
lead to an invalidation of the warranty, they may
also endanger you and your environment.

Device-specific safety instructions

• When operating the device ensure that the area

you are working in is clean and tidy.

• When working with the device make sure the

area is well lit.

• Make sure that flammable materials or materials

that may explode are kept out of the immediate
vicinity.

• Keep unauthorised persons away when starting

up the tool.

• Do not overload the device. Only use the device

for its intended purpose.

• Make sure you are positioned firmly and with a

natural stance when working with the device.

• Make sure to remove all adjusting tools from the

area (assembly wrenches etc.) before switching
on the device.

• Prevent overheating of the device and the work

piece.

• Guide the mains cable in such a way that it can-

not be caught by the tool.

• Never remove too much material in a single pro-

cess. It is better to remove small amounts in mul-
tiple processes.

• The device may only be operated by a single

operator at any one time.

• Ensure that, during operation, no parts of the

body, clothing or jewellery can be caught and
drawn in by the rotating components.

• Use a hair net if you have long hair.

• Always maintain sufficient distance to the grind-

ing disc. Wait until the grinding disc has come to
a standstill before removing work pieces, con-
tamination, etc. from the working area.

• Never leave the device to run unattended.
• Only use grinding stones that are in perfect con-

dition.

• The device may only be used in an oil-free envi-

ronment.

• The device may only be used in a frost-free envi-

ronment.

• After switching off the grinding disc, never use

your hands or an object to brake it.

• Remember that moving parts may also be

located behind ventilation and venting slots.

• Permit the motor to run for a maximum of three

minutes and then cool down for 7 minutes.

• Ensure that the ventilation slots are always free.
• Check the grinding stone before each use. Do

not use the device if the grinding stone is broken,
has a crack or is damaged in any other way.
Handle and store the grinding stone with care.

• Make sure that the grinding stone is correctly fit-

ted and secured. Allow the device to operate in
idle for 30 seconds in a safe location. Immedi-
ately stop the device if there are faults.

• This device is not designed to be used outside.
• Symbols affixed to your device may not be

removed or covered. Information on the device
that is no longer legible must be replaced imme-
diately.

Personal protective clothing

Remaining risks

There will still be residual risks even when the device
is used according to the instructions and under
observation of all of the safety notes in this set of
operating instructions:

• Touching the grinding stone surface in the

uncovered section.

• Kickback from work pieces and work piece

parts.

• When grinding, metal sparks are generated.

Caution risk of fire! Keep people and flammable
materials away from sparks.

Read the operating manual before using the
device

Pull out the power plug before conducting
any maintenance work on the device

Wear ear defenders

Wear safety goggles

Wear a dust protection mask

Wear protective gloves