CME UF 50 User Manual Download Page 3

 

3

Special Message Section 

 

This product utilizes batteries or an external 
power supply (adapter). Do NOT connect this 
product to any power supply or adapter other 
than one described in the manual, on the 
product, or specifically recommended by CME.

WARNING:

 Do not place this product in a 

position where anyone could walk on, trip over, 
or roll anything over power or connecting cords 
of any kind. The use of an extension cord is not 
recommended! If you must use an extension 
cord, make sure that the cord has the ability to 
handle maximum current needed by this 
product. Please consult a local electrician 
when possible. 

This product should be used only with the 
components supplied or recommended by 
CME. When used with any components, 
please observe all safety markings and 
instructions that accompany the accessory 
product. 

SPECIFICATIONS SUBJECT TO CHANGE: 

The information contained in this manual is 
believed to be correct at the time of printing. 
However, CME reserves the right to change or 
modify any of the specifications without notice 
or obligation to update existing units. 

This product, either alone or in combination 
with an amplifier and headphones or 
speaker(s), may be capable of producing 
sound levels that could cause permanent 
hearing loss. Do NOT operate for long periods 
of time at a high volume level or at a level that 
is uncomfortable. If you experience any 
hearing loss or ringing in the ears, you should 
consult an audiologist. 

IMPORTANT: The louder the sound, the 
shorter the time period before damage occurs. 

Some CME products may have stands and/or 
accessory mounting fixtures that are either 
supplied with the product or as optional 
accessories. Some of these items are 
designed to be dealer assembled or installed. 
Please make sure that stands are stable and 
any optional fixtures (where applicable) are 
well secured BEFORE using. 

Stands supplied by CME are designed for the 
respect products only. No other uses are 
recommended. 

 

 

NOTICE: 

Service charges incurred due to a lack of 
knowledge relating to how a function or effect 
works (when the unit is operating as designed) 
are not covered by the manufacturer’s 
warranty, and are therefore the owners 
responsibility. Please study this manual 
carefully and consult your dealer before 
requesting service. 

ENVIRONMENTAL ISSUES: 

CME strives to produce products that are both 
user safe and environmentally friendly. We 
sincerely believe that our products and the 
production methods used to produce them, 
meet these goals. In keeping with both the 
letter and the spirit of the law, we want you to 
be aware of the following: 

Battery Notice: 

This product MAY contain a small 
non-rechargeable battery which (if applicable) 
is soldered in place. The average life span of 
this type of battery is approximately five years.   
When replacement becomes necessary, 
contact a qualified service representative to 
perform the replacement. 

This product may also use “household” type 
batteries. Some of these may be rechargeable. 
Make sure that the battery being charged is a 
rechargeable type and that the charger is 
intended for the battery being charged. 

When installing batteries, do not mix batteries 
with new, or with batteries of different type. 
Batteries MUST be installed correctly. 

 

Mismatches of incorrect installation may result 
in overheating and battery case rupture. 

Warning: 

Do not attempt to disassemble, or incinerate 
any battery.  Keep all batteries away from 
children. Dispose of used batteries promptly 
and as regulated by the laws in your area. 
Note: Check with any retailer of household type 
batteries in your area for battery disposal 
information. 

Disposal Notice: 

Should this product become damaged beyond 
repair, or for some reason its useful life is 
considered to be at an end, please observe all 
local, state, and federal regulations that relate 
to the disposal of products that contain lead, 
batteries, plastics, etc. If your dealer is unable 
to assist you, please contact CME directly.

 

Summary of Contents for UF 50























































Reviews: