CME UF 50, User Manual, Page: 24 / 54

24
8 ASSIGNING
8.1 Assigning Controllers
z
You can use the ASSIGN function to re-define a control parts by data type and MIDI
channel.
z Operation ：【 SHIFT 】 Ö D#1 【 Assign Controller 】 Ö 【 Locate a control part 】 Ö 【 Set
value
】
Ö
【
ENTER
】
Ö
【
Assign Channel
】
Ö
【
Set value
】
Ö
【
ENTER
】
z In the above assigning operation, to 【 Locate a control part, please move a control
part. For example, you can move a fader or rotate a knob, etc.
z Controller value range
：
0-171
z Channel value range ： 1-16
z Please refer to the appendix <Assignable controller list> for more information.
There are two values for the cc#144 RPN and cc#145 NRPN in <Assignable
controller list>, which are MSB value and LSB value, so the keyboard will
instruct you to set the two values.
In <Assignable controller list>, the types from cc#149 to cc#171 are switch
controllers, so they can only be assined to buttons.
To assign the keyboard aftertouch to other controller, please use the below key
function assigning.
【
SHIFT
】 Ö
A#4
【
Assign A.Touch
】 Ö 【
Set value
】 Ö 【
ENTER
】
8.2 Assigning Notes
z You can assign the function shortcut button F1-F6 to note on/off message and set
the MIDI channel.
z Operation
：【
SHIFT
】
Ö E1
【
Assign Note
】
Ö
【
Locate a part
】
Ö
【
Set value
】
Ö
【
ENTER
】
Ö 【
Assign Channel
】 Ö 【
Set value
】 Ö 【
ENTER
】
z In the above operation, please press a button from F1-F6 to
【
Locate a part
】
.
z The note velocity is fixed to 127.
z
Note value range
：
0-127
z Channel value range
：
1-16
8.3 Assigning Program changes
z You can assign the function shortcut button F1-F6 to program change message and
set the MIDI channel.
z Operation ：【 SHIFT 】 Ö F1 【 Assign Program 】 Ö 【 Locate a part 】 Ö 【 Set value 】 Ö
【
ENTER
】
Ö
【
Assign Channel
】
Ö
【
Set value
】
Ö
【
ENTER
】
z
In the above operation, please press a button from F1-F6 to
【
Locate a part
】
.
z Voice value range
：
1-128
z
Channel value range
：
1-16
Refer to the appendix <Assignable controller list>, <Note list> and <GM voice
list>.