CME Matrix X, User Manual, Page: 13 / 16

Matrix X User's Manual
on the front panel of the Matrix X. Adjust the gain by turning the
“Mic / Guitar In” knob.
2. Set the recording device driver in the recording software.
3. Pick-up the audio signal from the microphone and start recording
in the software.
4. Use the input gain slider bar in the sound card’s control panel or
“Mic / Guitar In” knob of Matrix X to set the microphone input
signal gain to the software.
(b) Phantom power Microphone with XLR connector
1. Connect the microphone to the XLR jack of the combo connector
on the front panel of the Matrix X. Adjust the gain by turning “Mic
/ Guitar In” knob.
2. Press the “48V On / Off” button down.
3. Set the recording device driver in the recording software.
4. Pick-up the audio signal from the microphone and start recording
in the software.
5. Use the input gain slider bar in the sound card’s control panel
or adjust the “Mic / Guitar In” knob of the Matrix X to set the
microphone input signal gain.
(c) Microphone with TS connector
1. Connect the microphone to the TS jack of the combo connector on
the front panel of the Matrix X. Adjust the gain by turning the “Mic
/ Guitar In” knob.
2. Press “Guitar On / Off” button down.
3. Set the recording device driver in the recording software.
4. Pick-up the audio signal from the microphone and start recording
in the software.
5. Use the input gain slider bar in the sound card’s control panel or
the “Mic / Guitar In” knob of the Matrix X to set the microphone
input signal gain.
C. Recording an Electric guitar (or bass)
1.Connect the electric guitar (or bass) to the TS jack of the combo
connector on the front panel of the Matrix X. Adjust the gain by turning
the “Mic / Guitar In” knob.
2.Press the “Guitar On / Off” button down.
3.Play the electric guitar (bass) and start recording in the software.
4.The gain of the electric guitar (bass) can be adjusted not only on the guitar
(bass) but also via the “Mic / Guitar In” knob, or you can do the same
thing using the input gain slider bar in the sound card’s control panel.