CME Matrix X, User Manual, Page: 12 / 16

Matrix X User's Manual
3. Press the “48V On / Off” button down.
4. Press the “Direct Monitor” button down.
5. Start playing music and enjoying Karaoke.
6. Please adjust music volume on the external sound source. The gain
of microphone can be adjusted via the “Mic / Guitar In” knob. Use
the “Monitor Vol.” knob to adjust the main output volume.
(c) Microphone with TS connector
1. Connect the Line Out of the sound source (e.g. DVD player) to
the “Line Input” on the rear panel of the Matrix X.
2. Connect the microphone to the TS jack of the combo connector on
the front panel of the Matrix X. Adjust the gain by turning the “Mic
/ Guitar In” knob.
3. Press the “48V On / Off” button down.
4. Press the “Direct Monitor” button down..
5. Start playing music and enjoying Karaoke.
6. Please adjust music volume on the external sound source. The
gain of microphone can be adjusted via the “Mic / Guitar In”
knob. Use the “Monitor Vol.” knob to adjust the main output
volume.
2. Working together with sound card
In Hard-disk Recording mode, “Sound Card In” and “Sound Card Out” in
the rear panel of Matrix X have to be connected to “Line Out” and “Line In”
ports of Sound card. All other connections are the same as stand-alone mode.
In this mode, we recommend not using “Direct Monitor” to avoid latency
problems. All of the input and output signal monitoring will be done by
hardware mixing of Matrix X.
A. Recording from the Line In
1. Connect the Line Out of the sound source (e.g. DVD player) to the
“Line Input” on the rear panel of Matrix X.
2. Set the recording device driver in the recording software.
3. Playback music and record using the software.
4. Use the input gain slider bar on the sound card’s control panel to set
the input signal gain.
B. Recording from a microphone
(a) Self-powered Microphone with XLR connector
1. Connect the microphone to the XLR jack of the combo connector