background image

10

TROUBLESHOOTING

PROBLEM

The device does not respond and the indicator light 
does not come on when a button is pressed.

The device does not respond but the indicator light 
comes on.

When you press a button the indicator light 

fl

 ashes 

and the device does not respond to commands.

The remote control does not execute all commands 
correctly.

SOLUTION

Check that the batteries are charged and inserted 

correctly and if necessary replace them with 2 new 

1,5 V 

AAA/LR03

 alkaline type batteries.

Make sure that the remote control is pointing at the 

device and that there are no obstacles in the way.

If necessary, enter the remote control code again by 

repeating the programming procedure.
Substitute the batteries, which are about to go 

fl

 at.

You may be using an incorrect code.

Enter the remote control settings again by repeating 

the programming procedure.

INFO - LINE

 carefully read this Instructions Booklet which will allow you to solve most problems.

 consult the 

www.cme.it

 website where you will 

fi

 nd all the answers you need quickly and easily.

2 year WARRANTY

The warranty is voided if the product is tampered 

with or used improperly.

Remote control model 

Control 2 digital CME

Purchase date

Retailer stamp

The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the product must be 

collected separately from other waste. Therefore, at the end of the device’s life, you must take it to appropriate centres for the differentiated collection 

of electrical and electronic waste, or return it to the retailer when purchasing a new device of equivalent type, on a one-for-one basis. Suitable 

differentiated collection to allow subsequent recycling of the decommissioned device, with environmentally-compatible treatment and disposal, help 

to prevent any negative effects on the environment and health and to promote the recycling of the materials of which the device is made. Improper 

disposal of the product by the user will be subject to the sanctions in Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative 

Decree No. 22/1997).

If you have any queries regarding the new Control 2 digital CME remote control:

Summary of Contents for Control 2 Digital






Reviews: