Vision S Laptop Support - Information and Instruction Sheet
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T
: 01709 829 511 |
F
: 01709 378 380 |
E
W
: www.cmd-ltd.com
Issue 1 Date: 21/12/16
Cleaning, Storage and Maintenance
Service Components
Available to order.
Cleaning &
Maintenance
Dry cloth, no abrasives or solvents to
be used on the product surface.
Handling & Storage
Do not drop.
Warning
Do not exceed the recommended maximum weight.
We recommend using the C clamp and through desk
spreader pads to improve grip and protect the desk
surface.
Fixing Instructions
1.
The laptop support must be assembled before
use.
2.
Place the adjustable laptop tray face down and
attach the back support with the two hand-
tightening fixing nuts supplied (fig. 05).
3.
The assembled laptop support must then be
attached to the VESA on the arm section using
the four nuts provided (fig. 06).
4.
The cable management clip and laptop support
locking clip can then be installed. Care should be
taken to ensure the locking clip is fitted correctly
(fig. 07).
5.
The fully assembled laptop support can now be
installed on the Vision S pole by lifting the lever
before sliding the arm onto the pole to the desired
height and pushing the lever down to secure into
position (fig. 08).
6.
The laptop support head assembly can be adjusted
to support laptops of different weights (fig. 09).
Weight Adjustment
+ Kg
- Kg
fig. 09
fig. 05
fig. 06
fig. 07
fig. 08
x
