15
©
2016
Columbus McKinnon Industrial Products GmbH
I
NCORRECT
O
PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads with dimensions within the specified limits for usable height and tine length (Tab. 1)
must be picked up. The picked up load must never exceed the length of the tines.
When loaded and lifted, the load lifting attachment must have an inclination of min. 5° to the
rear (in the direction of the beam), never into the opposite direction!
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
It is forbidden to apply lateral tensile forces to the load lifting attachment.
Neither the load lifting attachment nor its parts must be used as a means for attaching ropes,
chains or belts.
If more than 2 load lifting attachments are used, a spreader beam must be used in order to
avoid impermissible lateral tensile forces.
The crane fork must only be used for transporting goods which are firmly tied on pallets or
goods which owing to their shape and size can be directly picked up by the fork tines.
Attention: When lifting the loaded crane fork, the tips of the fork tines must never point
downwards!
Do not allow the load lifting attachment to fall from a large height.
The unit must not be used in potentially explosive atmospheres.
Lastschwerpunkt
Load centre of gravity
Load centre of gravity
min. 5°
