FIG. 32 FIG. 33
To secure the wake boards to the wake board racks, starting at the top of the
brace plate, insert the end of shock cord assembly opposite the handle into the
two machined slots as show in Fig. 33. Pull the shock cord over the boards and
up into the two machine slots at the bottom of the brace plate (Fig. 34). Insert into
these two slots as shown in Fig. 35.
FIG. 34 FIG. 35
STORAGE
The tower can be tilted forward or backwards for storage if desired. Remember,
the wire cable must go through one of the pivot clevis feet so that the wires will
not have to be disconnected. To tilt forward, remove the two 3/8”-16 X1-1/2”
bolts from the clevis pins at the back and tilt forward as shown in Fig. 28. To tilt
toward the back, remove the two 3/8”-16 X 1-1/2” bolts from the clevis feet at the
front as shown in Fig. 29. Or remove the tower completely by taking all four of the
clevis pins from the clevis feet.
12
Summary of Contents for Typhoon Tower
Page 1: ...OWNER S MANUAL 1...
