Getting Started
2.2.3. Connecting the Scrap Accumulator and Drain
The scrap accumulator is designed to perform two basic functions:
1. It allows a method to discharge all the heavy solids out of the machine with each
wash cycle.
2. It provides accumulation capacity to allow draining the contents of one cycle
regardless of the discharge rate of the existing drain.
The drainpipe is connected to the scrap accumulator drain using a 2” no-hub connector as shown
in
Figure 2.2.3
below.
2" DRAIN
SLEEVE
2"
NO-HUB
2" DRAINPIPE
SCRAP ACCUMULATOR
HOSE
CLAMPS
Figure 2.2.3
MODEL CWS SERVICE & PARTS MANUAL Rev. 1.00
Page
5
