CM Truck Beds ER Truck Bed, Installation Manual

Page: 32 / 32

31
NOT included with the bed and is the buyer’s responsibility to handle or purchase.

The CM installation kit (P/N 1080065) includes a bolt bag and plates for securing the truck bed
to the truck frame
. It is highly recommended to purchase the installation kit with any CM
truck bed.

Resistors and/or relays may be needed during the electrical components installation,
depending on the year and model of truck.

CM harnesses are available for easy truck bed wiring. However, depending on the model of
truck, some splicing may be required.
o
If splicing is required, it is highly recommended to use water-resistant materials such as
heat-shrink butt connectors.

Installing cameras, backup sensors, or other equipment is not included in the standard
installation price and may incur an additional charge

By modifying your truck for an aftermarket flatbed, you may experience temperamental fuel
filling that could require you to turn the nozzle in a certain direction or hang the pump at a
certain angle to retain full-speed fill rates. If factory fuel filling performance is critical, we
recommend you retain a factory truck bed.

The vehicle's exhaust may require modification after install. This is not included & is your
responsibility.

For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static
electricity & sparking.

Certain years and models of trucks may require computer re-flashing or programming by
franchise dealer after truck bed installation. This is not included & is your responsibility.
o
2017 and newer Ford Super Duty Bed Delete Customers Only: Ford has released a
service bulletin regarding hyper flashing, as well as other electrical components not
functioning correctly after a factory bed is removed due to the body control module
(BCM) programming. It is possible that your truck might exhibit these issues after bed
installation. These issues have been known to resolve themselves after several days of
driving the vehicle. If issues persist, you may need to have your BCM flashed at your
local Ford dealership. This service is not included in our standard installation pricing.

CM’s 1-year finish warranty does not cover normal wear including physical damage, chipping,
scratching, fading, cracks in caulk seams, road salt, or tar damage. Rust streaking originating
from areas where it is virtually impossible to achieve total paint or powder coat coverage, i.e.
behind rub rails or where two or more metals adjoin, are considered to be consistent with
industry standards and not covered.