1. Insert the supplied CD-ROM into the CD-ROM drive of your PC. The dialog box shown on the right
should appear. If the installation program does not start automatically, double-click on the My
Computer icon on your Desktop, double-click on the letter of your CD-ROM drive (usually labeled D),
and then double-click on the Install.exe file.
2. Select the desired language and the driver you want to install, and then click "Install" to begin the
installation. If you want to use the TTS (Text-to-Speech) feature, select the "Mp3 TTS" radio
button. (If you select this option, the installation will take approximately 5 minutes, although this time
may vary depending on your PC configuration.)
3. Click "Next"
Æ
"Finish" to complete the software installation and restart your PC.
4. After your PC has restarted, you will see the Music Box Explorer icon on your Desktop.
5. With the battery installed in the device, connect the device to the USB port on your PC, and then
press the >> button to power on the device.
6. The "READY" message will be displayed on the LCD, and the Found New Hardware Wizard dialog
box will appear as shown below. Click "Next"
Æ
"Finish"
Æ
"Next"
Æ
"Continue"
Æ
"Finish" to
complete the device installation.
7. The Firmware Update confirmation dialog box should appear as shown below.
Click "OK"
Æ
"Start"
Æ
"Close" to complete the update.
This part of the installation needs to be performed only once when you install the device for the first
time in order to allow the song titles to be displayed correctly.
8. After the firmware update is complete, be sure to disconnect the device from your PC, then
reconnect it.
9. If the steps up to this point have been completed successfully, then the whole installation process
is now complete.
When you double-click on the Music Box Explorer icon on your Desktop, you will see the Music Box
Explorer as shown below.
6
Uninstalling the Software
■ Removing the MP3 Driver
1. If the device is already connected to your PC, disconnect it.
2. Go to Control Panel
Æ
Add/Remove Programs. Now you should see a list of installed programs.
3. Scroll through the list, highlight "SMC Music Box MP3 Player", and then click on the
Change/Remove button. The InstallShield Wizard dialog box will appear as shown below.
Select the "Remove" radio button, and then click "Next"
Æ
"OK".
4. Finally, click "Finish" to complete the uninstallation.
5. If the installation was not successful or if you need to reinstall the driver for any reason, follow the
above steps to remove the driver, and then use the supplied CD-ROM to reinstall the driver.
■ Removing the TTS Engine
Go to Control Panel
Æ
Add/Remove Programs. Select "TTS" from the list of installed programs and
click "Change/Remove". Then finish the process by completing the steps 3 and 4 above.