Gearcase Lubrication
Rear transaxle:
Clean and install the drain plug (2) and washer before filling the rear transaxle with new lubricant
(Figure 30)
. Tighten
the drain plug to 8 ft-lb (10.8 N·m). Remove the fill plug/dipstick (2)
(Figure 32)
. Use a funnel and tube to fill the
transaxle through the fill plug/dipstick hole (1) located on the top of the rear transaxle
(Figure 31)
.
See Periodic
Lubrication Schedule on page 39.
Replace rear transaxle dipstick and tighten to 35 in-lb (4 N·m).
2
1
808
Figure 30
Rear Transaxle Drain Plug
819
Figure 31
Rear Transaxle Check/Fill Plug
2
3
2
1
1. Full Level 2. Safe Level 3. Low Level
820
Figure 32
Rear Transaxle Dipstick
824
Figure 33
Rear Transaxle Lubricant Level Check
Page 46
XRT 950 Gasoline Vehicle Owner’s Manual
