Controls and Indicators
WARNING
• Release the accelerator pedal and then press the brake pedal firmly until the vehicle stops. To avoid
unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse switch in
the NEUTRAL position, turn the key switch to the OFF position, and remove the key when leaving
the vehicle.
• Any modification to the vehicle that affects the stability or handling of the vehicle, or increases
maximum vehicle speed beyond factory specifications, could result in severe personal injury or death.
KEY SWITCH
The key switch (1) is mounted on the dash to the right of the steering column
(
Figure 5).
This vehicle is equipped with a two-position (“pedal-start”) key switch.
NOTE:
The key can be removed only when the key switch is in the OFF position.
FORWARD/REVERSE CONTROL
The Forward/Reverse rocker switch (2) is located on the right-hand side of the instrument panel
(Figure 5)
. The
F
(FORWARD) and
R
(REVERSE) positions are clearly marked. Press the FORWARD side of the switch to operate the
vehicle in the forward direction, or press the REVERSE side of the switch to operate the vehicle in reverse. When the
rocker switch is positioned in NEUTRAL, with neither side down, the vehicle will not operate if the accelerator pedal is
pressed. The reverse buzzer will sound as a warning when the Forward/Reverse switch is in the REVERSE position.
1
3
4
2
529.eps
Figure 5
Instrument Panel
Villager LSV Owner’s Manual
Page 17
