Page 12
VILLAGER 2+2 LSV ELECTRIC
Operators Manual
TPCC01VS00EN017 (Edition A)
WARNING
ELECTRICAL SHORTS CAN CAUSE A FIRE OR ELECTRICAL SHOCK.
PREVENT CONTACT BETWEEN POSITIVE VOLTAGE AND THE
GROUND CIRCUIT. USE INSULATED TOOLS.
TO HELP PREVENT BEING HIT, DO NOT STAND IN FRONT OF OR
BEHIND THE VEHICLE.
ONLY TWO PERSONS PER BENCH SEAT. ONLY RIDE ON THE
BENCH SEAT. DO NOT LET PEOPLE RIDE ON ANY PART OF THE
VEHICLE THAT IS NOT EQUIPPED WITH A SEAT. DO NOT LET A
PASSENGER HOLD A CHILD IN HIS OR HER LAP WHILE THE
VEHICLE MOVES.
ONLY TRAINED TECHNICIANS SHOULD SERVICE OR REPAIR THE
VEHICLE. ANYONE DOING EVEN SIMPLE REPAIRS OR SERVICE
SHOULD HAVE KNOWLEDGE AND EXPERIENCE IN ELECTRICAL
AND MECHANICAL REPAIR. THE APPROPRIATE INSTRUCTIONS
MUST BE USED WHEN PERFORMING MAINTENANCE, SERVICE, OR
ACCESSORY INSTALLATION.
CAUTION
THE LSV ELECTRIC VEHICLE IS EQUIPPED TO OPERATE AT A TOP
SPEED OF 25 MPH (40 KM/H) AND IS INTENDED FOR USE AS A
LOW-SPEED VEHICLE.
VEHICLE SAFETY AND COMPLIANCE DECALS
WARNING
MAKE SURE ALL OF THE SAFETY AND OPERATION DECALS ARE IN
THE CORRECT LOCATION ON THE VEHICLE. REPLACE THE SAFETY
AND OPERATION DECALS THAT ARE MISSING OR DAMAGED.
Understand and obey all safety decals. The instructions on these safety decals must be followed in
order to prevent the risk of dangerous personal injury or property damage.
Use a soft moist cloth to clean the decals. Do not use solvents, gasoline, or other chemicals to clean
the decals.
