34
●
Do not use a charger if any of the following conditions exist:
○
The plug is too loose or does not make a good connection.
○
The plug and receptacle feel hotter than normal during charge.
○
The plug pins or receptacle contacts are bent or corroded.
○
The plug, receptacle, or cords are cut, worn, have exposed wires or are damaged
in any way.
●
Using the charger with any of the above symptoms could result in a fire, property damage,
personal injury, or death.
CAUTION
●
On all units, turn off Tempo Walk before charging battery.
●
The battery charger provided with this unit is approved for use only with the battery type
originally shipped with the unit. Using a different battery type (different brand, different
capacity, etc.) can cause under or overcharging and subsequent battery damage. Club
Car recommends only OEM replacement battery. Contact your authorized Club Car
dealer/distributor with any questions about battery and charger compatibility.
Battery Charging Procedure
1. With the charger cord disconnected from the unit charger receptacle, connect the power supply
cord to an outlet designed to provide the proper voltage for the NOCO G7200 charger.
2. Insert the charging plug into the unit receptacle. When inserting the charging plug, align the
raised guide on the plug with the guide slot in the receptacle and push straight in slowly (Figure
18).
3. The charger will turn on in two to five seconds later, after the lockout function activates.
4. As long as the charger is allowed to shut off by itself, the battery will be fully charged.
Overcharging and undercharging will normally be prevented.
5. If the charger does not seem to be operating properly, or if the battery seems weak, contact your
local Club Car distributor/dealer.
Figure 18
CORRECT
Insertion of Charger Plug
Figure 19 INCORRECT Insertion of Charger Plug
