14
REPLACING A TOGGLE SWITCH
The most common maintenance item on the transmitter is a broken toggle switch.
Replacement is easy
1) Make sure the transmitter is turned off.
2) Loosen the nut securing the toggle switch at the side of the transmitter case.
3) Remove the 2 screws on the front lid of the case.
4) Gently remove the transmitter case lid.
5) Gently unplug the white toggle switch connector from the Transmitter board see figure 10.
6) Plug in a new toggle switch to the transmitter board. Make sure the toggle switch is
oriented so that
the “On” position will be up when the case lid is reattached.
7) Repeat steps 2-4 in reverse order to close and secure the transmitter case.
Figure 10 Opened Transmitter
CHANGING CHANNELS ON TEMPO WALK
⚠
DANGER
●
Never have 2 or more Tempo Walk units with the same channel
turned on, in the same proximity (i.e. 500 Yards).
●
Never have 2 or more Tempo Walk Transmitters with the same
channel turned on, in the same proximity (i.e. 500 Yards)
⚠
WARNING
Make sure all units in the immediate area are turned off as well as all transmitters
Changing the channel of a Tempo Walk unit requires two steps. First you must set the channel on the
Tempo Walk transmitter, and second you must set the channel on the unit itself. These channels must be
the same for the unit to operate properly
