General Warnings
DISCONNECTING THE BATTERIES – ELECTRIC VEHICLES
1.
Disable the vehicle.
See Disabling the Vehicle on page 11.
2.
Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries. Failure to heed
this warning could result in a battery explosion or severe personal injury.
3.
Disconnect the batteries, negative (–) cable first, as shown
(Figure 2)
,
(Figure 3)
or
(Figure 4)
.
4.
After disconnecting the batteries, wait 90 seconds for the controller capacitors to discharge.
CONNECTING THE BATTERIES – ELECTRIC VEHICLES
1.
Ensure the Tow/Run switch is in the TOW position.
2.
Connect the battery cables, positive (+) cable first.
3.
Tighten battery terminals to 110 in-lb (12.4 N·m).
4.
Coat terminals with Battery Terminal Protector Spray (CC P/N 1014305) to minimize corrosion.
1
2
3
4
0
0
R
U
N
T
O
W
3
2
1
(+)
(–)
(Viewed from driver side of vehicle)
1. Place TOW/RUN Switch in TOW before disconnecting or
connecting battery cables.
2. Remove negative battery cable.
3. Remove positive battery cable.
Connect battery cables in reverse order.
49
Figure 2
Battery Cable Removal – Style A 4x12-Volt
Battery Configuration
Page 12
Precedent 4-Passenger Vehicle Owner’s Manual
Summary of Contents for Precedent 4-Passenger
Page 2: ......
Page 42: ......
Page 43: ......
Page 44: ...Publication Part Number 103814511 Edition Code 1210A00000 103814511...