UNITIZED TRANSAXLE
Unitized Transaxle Installation
Page 16-20
2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
16
Unitized Transaxle Installation, Continued:
29. Connect the impulse line to the fuel pump and secure it with the hose clamp
(Figure 16-50, Page 16-20)
.
30. Connect air intake hose to carburetor and secure hose clamp
(Figure 16-51, Page 16-20)
.
31. Connect carburetor vent tube to carburetor and secure with hose clamp
(Figure 16-52, Page 16-20).
32. Install transaxle drain plug and tighten to 21 ft-lb (28.5 N·m).
33. Fill transaxle with 27 oz. (0.8 liter) 80-90 WT. API class GL-3 or 80-90 WT. AGMA class EP gear lube.
Install and tighten the level indicator hole plug to 21 ft-lb (28.5 N·m).
34. Ensure that all wiring is secured properly.
See following WARNING.
Figure 16-50 Impulse Line
Figure 16-51 Air Intake Hose
Figure 16-52 Carburetor Tube
IMPULSE LINE