CARRYALL 502 ELECTRIC
Operators Manual
TPCC01DQ00EN019 (Edition C)
Page 71
• Disable the vehicle.
To add water to the batteries:
1.
Unlock and remove the cap (1).
2.
Make sure that the battery acid (2) is level with or above the top of the plates (3).
3.
If the battery acid is level with or above the top of the plates:
3.A
Install and lock the cap.
3.B
Fully charge the batteries.
4.
If the battery acid is below the top of the plates:
4.A
Add water until the battery acid is level with the top of the plates.
4.B
Install and lock the cap.
4.C
Fully charge the batteries.
5.
Unlock and remove the cap.
6.
Make sure that the battery acid is 0.5 inches (13 mm) above the top of the plates. Add water as
necessary.
CAUTION
LOOSE BATTERY CAPS CAN CAUSE BATTERY ACID TO LEAK.
FULLY ATTACH THE BATTERY CAPS TO PREVENT LEAKAGE.
7.
Install and lock the cap.
Summary of Contents for CARRYALL 502 ELECTRIC
