Controls and Indicators
Page 26
2007 Turf/Carryall Vehicle Owner’s Manual
PARK BRAKE PEDAL
The park brake pedal is the small raised portion in the upper left corner of the brake pedal. It has the word
PARK molded into it and the words PARK BRAKE marked on top of it
. To set the park brake, press
the brake pedal firmly and tilt the park brake portion of the pedal forward with your foot
.
See fol-
lowing WARNING.
ý
WARNING
• The park brake will release automatically when either the accelerator or brake pedal is
pressed. The park brake has multiple locking positions and should be firmly pressed and
locked to prevent the vehicle from rolling.
TOW/RUN SWITCH
Electric Vehicles Only
ý
WARNING
• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.
Failure to heed this warning could result in a battery explosion or severe personal injury.
• When the Tow/Run switch is in the TOW position, all motor braking functions, including zero-
speed detect, are disabled.
Electric vehicles are equipped with a Tow/Run switch (1), located on the seat support panel under the seat
or
. The switch must be in the RUN position in order to operate the vehicle. When the
switch is in the TOW position, power to the vehicle electrical components is turned off and the vehicle will not
operate.
See following NOTE.
NOTE: After placing the Tow/Run switch in the TOW position, allow 10 seconds to elapse before switching
back to the RUN position.
After placing the Tow/Run switch in RUN position, allow 10 seconds to elapse before operating the
vehicle.
Figure 9 Brake Pedal
Figure 10 Park Brake