www.cls-led.com
www.cls-led.com
6
5
2a
2b
1
CLS Eutrac
3-phase rail
+ data
3
5
# Y108152
90°- 0 - 90°
B
A
90°- 0 - 90°
B
4
# Y108155
Position
indicator
340º
INSTALLATION
WITH EUTRAC ADAPTER
PROGRAMMING
1
2
3
* If the LEDs flashes 10 times, something went wrong. Please try again. If the problem continues to occur, please contact your local sales distributor.
After 2 seconds
the LED will flash
3 times
confirming
storage*
Place magnet
at the bottom
of the Jade.
The LED will
light up
FACTORY SETTING TABLE
All settings can be configured via DMX. Settings can be configured at once or separately. When one or a couple settings needs to be
changed just leave all other setting values zero. This keeps those settings unchanged. Please check the table for more information.
Always use a DMX controller with digital interface. If not available, you can purchase the CLS D-ta DMX addresser unit (
#122200).
First make sure to set the DATA on the DMX controller. To program the setting into the LED fixture follow the next steps.
Max. 20 pieces of Jade Colour Flow per DMX line on a rail.
Max. 20 pieces of Jade Colour Flow can be connected in a group.
