V 1.0
–
12/03/2020
–
CLS-ENV-MU-20-0106
26
6.
PC connexion (USB Communication mode)
You may connect your Goniometer to a PC through a USB link. The USB communication software will
allow you to:
A.
Load new firmware versions onto the Goniometer
B.
Configure the Goniometer through a user friendly setup menu
C.
Download all messages recorded into the Goniometer for your favorite platforms (up to
200 000 MSG), in XLS format.
D.
Easily setup new Argos platforms in the Goniometer as favorites
E.
Automatically record all received Argos messages (Favorites and non-Favorites platforms) in
the log file while Goniometer is connected, in the (usually log_S/N.txt in
User/Documents/
RXG-234 Comm Software/
directory). $NPR and $NPRF format description
accessible on upon request to CLS.
F.
Access the HyperTerminal mode: all the Argos platforms received by the Goniometer will be
displayed in real time (as in the log file).
G.
Choose a format for GNSS position decoding (so GNSS positions transmitted in the Argos
message can be decoded, in real time, by the Gonio)
