Tool required:
Piece required
：
C Screws
D Screws
E Screws
Drill / Driver
Part required:
Rubber Cushion
Insert rubber cushions and plastic pads into
crossbar and side brackets.
Plastic Pad
Attach the brackets and the crossbar to the table
top using 6 pcs ST4.8*25 screws. Next, attach the
control box using 2pcs ST4.8*19 screws. Lastly,
attach the keypad to the table top using 2pcs.
Attach cables from each of the two motors to the
control box. Then plug the cable from the keypad
to the control box. You’re finished!
