DLM-1 Series Installation Guide V1.0
4
FACEPLATE CONTROLS AND CONNECTIONS
1
MIC LEVEL
4
5
2
3
6
7
9
10
8
0
MIC INPUT
MUSIC LEVEL
LINE INPUT
MIC
PRIORITY
1
4
5
2
3
6
7
9
10
8
0
DLM-1
4
5
6
1
2
3
1.
MIC INPUT
– 3-pin XLR3F connector for dynamic microphones. Note that the DLM-1 does not provide phantom power.
2.
LINE INPUT
(a) – 2 x phono (RCA) sockets for connection of sources such as CD players, audio mixers, radio mic
receivers, etc; suitable for line level signals with a nominal level of 0 dBu.
3.
LINE INPUT
(b) – 3-pole 3.5 mm jack socket for connection of sources such as computers, laptops and digital media
players; suitable for line level signals with a nominal level of -10 dBV.
NOTE: Stereo line inputs [2] and [3] are summed together, and also summed to mono. If using a mono source (e.g., a radio mic
receiver) we recommend that its output is connected to both L and R inputs using an adaptor or suitably wired cable: this will
avoid unwanted signal attenuation.
4.
MIC LEVEL
– gain control for mic input. Up to 40 dB gain is available; with the control fully anti-clockwise, the input is
effectively ‘off’
5.
MUSIC LEVEL
– level control for whichever line input ([2] or [3]) is in use. Adjust to suit the level from the source device
in use.
6.
MIC PRIORITY
– default function for this button is to give the microphone input priority over the line input(s). See
