46/50 Integrated Mixer Amplifier
Setup And Installation Guide
CLOUD ELECTRONICS LIMITED
5.2 Music Control - Local or Remote
The music source and music
level control functions can be
controlled from either the front
panel, or a remote control plate
located up to 100m from the
46/50. There are two remote
control plates available for the
46/50 the RSL-6 and the RL-1.
The RSL-6 should be used
when remote control of music
source and music level is
required whereas the RL-1 can
be used when the application
calls for remote control of the
level only (source selection via
front panel). RSL-6 and RL-1
remote control plates can be
mounted onto a standard British
flush or surface mounted 25mm
deep back box. Two-core cable
with overall screen should be
used to connect the remote
controls to the Cloud 46/50 the
diagrams above show how to
connect the two remote plates.
When using an RL-1 remote level control with the 46/50, the relevant jumpers (see list below)
should be in the 'FR' position to allow front panel control of the music source. Self-adhesive
labels (supplied) can be affixed to the front panel and/or RSL-6 to identify the available input
sources.
The RSL-6A and RL-1A are available for the American market. They operate identically to the
RSL-6 and RL-1 but have been designed to fit a single gang US electrical outlet box. Front panel
dimensions are 4
1
/
2
"x 2
3
/
4
"
3
V6 070113
1
2
3
RSL-6
1
2
3
3 POLE
CONNECTOR
MUSIC CONTROL
REMOTE (IN)
MUSIC CONTROL SWITCH SHOULD
BE SET TO THE ‘REMOTE’ POSITION
STANDARD WIRING CONVENTION
USE TWO-CORE SCREENED CABLE
REMOTE CONTROL OF MUSIC SOURCE AND LEVEL
1
2
3
3 POLE
CONNECTOR
MUSIC CONTROL
REMOTE (IN)
MUSIC CONTROL SWITCH SHOULD
BE SET TO THE ‘REMOTE’ POSITION
FOR APPLICATIONS REQUIRING REMOTE CONTROL OF
MUSIC LEVEL WITH FRONT PANEL SOURCE SELECTION
REMOTE CONTROL OF MUSIC LEVEL
(WITH FRONT PANEL SOURCE SELECTION)
1
2
3
RL-1
SOURCE
SELECT
JUMPER
FR SW
THE RELEVANT JUMPERS SHOULD
BE SET TO THE ‘FR’ POSITION
ATTENTION!
REMOVE POWER CABLE BEFORE MAKING ANY INTERNAL ADJUSTMENTS
OPTIONAL WIRE
Location of J3, J4, J5 and J6
J3:
Zone 1
J4:
Zone 2
J5:
Zone 3
J6:
Zone 4
Summary of Contents for 46 INTEGRATED
Page 24: ...Notes...
