![Cloud 46 INTEGRATED Setup And Installation Manual Download Page 5](http://html1.mh-extra.com/html/cloud/46-integrated/46-integrated_setup-and-installation-manual_2626211005.webp)
46/50 Integrated Mixer Amplifier
Setup And Installation Guide
CLOUD ELECTRONICS LIMITED
1 Safety Notes
For more detailed information refer to the rear of the manual.
• Do not expose the unit to water or moisture.
• Do not expose the unit to naked flames.
• Do not block or restrict any air vent.
• Do not operate the unit in ambient temperatures above 35°C.
• Do not touch any part or terminal carrying the hazardous live symbol ( ) while power is
supplied to the unit.
• Do not perform any internal adjustments unless you are qualified to do so and fully
understand the hazards associated with mains operated equipment.
• The unit has no user serviceable parts. Refer any servicing to qualified service personnel.
• If the moulded plug is cut off the lead for any reason, the discarded plug is a potential
hazard and should be disposed of in a responsible manner.
2 General Description
The Cloud 46/50 is a versatile, Four Zone 50W x 4 Integrated Mixer Amplifier. It has applications where
up to two microphones and six line level music signals are required to feed four separate areas in any
combination. There are various optional accessories that extend the flexibility of the 46/50:
• A paging mic with pre-announcement chime.
• Optional remote plates that allow remote control of music level and source selection.
• An internally mounted 4 channel 100V/70V line transformer module.
• Active input modules for Zone 1 only, such as the DM-1 or LM-1.
• Internal active equalisation modules for speakers
Along with these accessories the 46/50 has: - microphone priorities, fire alarm mute, auxiliary outputs for
Zones 1 & 2 only and the possibility for Line 6 to have priority over the music signals of Zone 1 only.
The front panel controls are reduced to a minimum to avoid confusion; if preferred, the 46/50 can be
positioned in a protected area with the remote music source and level controls positioned in the most
appropriate location. All pre-set controls are on the rear panel or on the front panel protected by a cover.
1
V6 070113
Summary of Contents for 46 INTEGRATED
Page 24: ...Notes...