Clorox® TurboPro™ Electrostatic Sprayer Safety Instructions
|
8
1. To start the use of the Clorox® TurboPro™ Electrostatic Sprayer first charge your
battery by inserting the Clorox® TurboPro™ 16.8 volt battery into the charger and
plugging the charger into a wall socket.
2. Next fill the tank (A) by first removing it from the unit by rotating the tank locking
collar (C) and pulling the tank release ring (B). The tank can now be removed.
Note:
You must hold on to the tank when you pull the tank release ring or the tank
will fall to the floor.
3. Fill the tank with the approved disinfectant.
4. Insert the tank into the sprayer and rotate the tank locking collar (C) until you hear
the click of the tank release ring (B) snap into place.
5. Insert the charged battery into the battery socket and lock in place.
6. Pull the trigger and spray on your desired surface.
7. Keep spray area well-ventilated.
8. Spray surface from 2–3 feet away using a sweeping motion until thoroughly wet.
9. Allow surfaces to air dry. Follow the product label instructions regarding
post-application cleaning of surfaces, including food-contact surface rinsing
requirements.
To ensure maximized electrostatic performance always keep your hand firmly wrapped
around the handle in contact with the grounding strap.
B
E
F
C
G
D
J
I
H
A
Tank Cap
16.8 V Battery
16.8 V Charger
