CLIVET ELFOFresh EVO CPAN-YIN, Manual For Installation, Use And Maintenance

Page: 26 / 76

26
5 - AERAULIC CONNECTIONS
•
Unit position:
in a specific room (where temperature never drops below 10°C), away from bedrooms. Check useful height available
in relation to the unit’s height and local regulatory constraints.
•
Choose the position of the fresh air intake:
check local regulations (especially the minimum height between the lower point of the intake and the ground)
avoid positions excessively close to the ground (entry of odours / radon)
choose the shortest possible distance from the unit
install anti-intrusion grilles to prevent small animals or leaves from entering (accessory supplied separately)
prevent water infiltrations
avoid positions close to windows, terraces, etc.
avoid positions close to flues of boilers, extractors, etc.
avoid vehicle parking areas
avoid bypasses with stale air exhaust
•
Choose the position of the exhaust outlet:
see previous point
avoid positions close to windows, terraces, etc.
avoid windward zones
avoid pedestrian passages
avoid unventilated attics, garages, basements
•
Choose the rooms with air intake: living room, bedrooms, study, etc…...
•
Identify the position of the intake nozzles (ceiling, wall, or floor)
•
Choose the rooms with air extraction:
kitchen, bathroom, store rooms, lofts, dry cleaners, walk-in closet, etc.
avoid suction from the kitchen hood, as it is too close to the hob. Minimum horizontal distance from the hob ~ 1 m
•
Choose the outlets:
always high, as this position facilitates moisture extraction
•
Check the passage of air between the various rooms (a gap below the door of 1 cm approx.) to allow air circulation
•
Supply and return box:
to be installed in a barycentric position, so the air ducts have a similar height
Before installing the aeraulic system, check the passages of the pipes and position of the accessories based on the
design.
AERAULIC SYSTEM