AmazingE
FAST
EVSE User Manual
Page 14
OPERATION
The AmazingE
FAST
EVSE is a compact, travel-friendly EVSE that
provides the Plug-In Electric Vehicle (PEV) user with a safe and
manageable link between the power grid and the PEV.
Plug the EVSE into the wall or have a licensed electrician install the
hardwired EVSE. Unwrap the charge cable and plug the charge coupler
firmly into the vehicle’s charge port. Do not unplug from the wall
while the vehicle is still connected. Always turn off input power to the
EVSE at the circuit breaker panel prior to plugging into or unplugging
from a wall socket.
Normally, the vehicle will immediately request a charge using a special
communication line in the cable. Within a few seconds the charging
cycle will begin. After an average driving day the vehicle battery pack
will require several hours (length of time depends on the vehicle
acceptance rate, battery pack size and the vehicle’s state of charge)
to recharge completely. Charging overnight is the most convenient
way to maintain healthy batteries and ensure the vehicle’s full range
will be available for the next day.
To remove the charge coupler once a charge cycle has completed
(or to interrupt a charge in progress) press and hold down the latch
release lever on the charge coupler handle then unplug the charge
coupler from the vehicle charge port.
NOTE:
Multiple configurations of the AmazingE
FAST
are
discussed in this manual; we recommend contacting
AmazingE Customer Service as some units may not yet
be available.
THIS DEVICE IS NOT INTENDED FOR USE WITH AN
EXTENSION CORD.
