Clipper BBH255, Owner'S Manual

Page: 10 / 29

9
II. OPERATION
B. How to Mount Blade
Be sure blade shaft collars and arbor are free of dirt and all foreign material before mounting blade
on the arbor shaft. Tightening blade against an uneven surface can cause fracture of an abrasive
blade or cause to run-out of alignment, causing excessive blade wear.
When tightening bolt against outside blade shaft collar, be sure to tighten enough to hold the blade
firmly without slipping but do not over tighten -excessive tightening can cause fracture of abrasive
blades.
Using blade shaft wrench (in bracket) remove the blade shaft bolt and loosen collar.
Place the blade on the arbor, and attach the loose collar and tighten the blade shaft bolt securely.