33
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication
status when controlling the camera through an external control device.
1) When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow
indicates ‘COMM ADJ’.
2) Set up the mode using the 4 direction buttons.
– CAM ID : Determines the camera’s identification number (between 0 and 255).
– BAUD RATE : Select 2400/4800/9600/19200/38400/57600 bps.
– UART MODE : Select NONE, EVEN or ODD for the parity bits.
– RET PKT : Determines whether to send a command back to the controller device when a
communication control command is sent to the camera.
– DISP ID : Display the camera title on the top left corner of the screen.
– PROTOCOL : STW(SPD), PELCO-D, PELCO-P, SEC, BOSCH, HONEY WELL, VICON, PANA.
LANGUAGE :
You can select the menu language according to your requirements.
RETURN :
Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu.
Select a desired EXIT mode using the Left and Right buttons depending on the camera purpose.
– SAVE : Save the current settings and exit the MAIN SETUP menu.
– NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
– RESET : Resets the camera settings to the factory defaults. Language and Monitor settings are
not initialized.
Exit
Summary of Contents for Public View CE-M8SD-B
Page 36: ...v 11 01 11 ...
