Clinton Electronics Public View CE-M8SD-B, User Manual

Page: 21 / 36

21
1. When the SETUP menu is displayed, select ‘EXPOSURE’ by using the Up and Down buttons so
that the arrow indicates ‘EXPOSURE’. Press SETUP to enter.
2. Select the desired mode using Up and Down buttons.
BRIGHTNESS : Adjusts the exposure brightness.
SHUTTER
: You can select either auto or manual shutter.
– A.FLK : Select this when you experience picture flicker, which can happen when there is a clash
with the frequency of the installed lighting.
– ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter
speed is automatically controlled depending on the ambient illumination of the subject.
– MANUAL: You can control shutter speed manually. (1/60 ~ 1/120,000)
AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen, but the higher
the noise.
– OFF : Deactivates the AGC function.
– LOW : Allows automatic gain control from 5.3dB to 32dB.
– HIGH: Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains
a clear picture if this mode is activated.
– OFF : Deactivates the SENS-UP function.
– AUTO : Activates the SENS-UP function.
RETURN
:Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Exposure
Notes
• When using a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to ESC after selecting Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.