Clinton Electronics CE-D958, User Manual

Page: 4 / 17

4
High Resolution Color Wide Dynamic Dome Camera
5
High Resolution Color Wide Dynamic Dome Camera
Additional Functions
SYNC (INT/LL), SENS-UP, FLIP(H/V-REV)
and SHARPNESS functions are provided.
Controlled by OSD Menu
The camera can be controlled by selecting
text displayed on the monitor screen.
Wide Dynamic Range (WDR)
The camera delivers clear high quality
pictures, even when backlit, by increasing
exposure in dark areas while decreasing it in
bright areas; a corrected image with clear
details results.
ㆍ
120dB maximum dynamic range
Motion Detection
Since the camera detects motion without
any additional external sensor, you can
monitor activity more efficient.
3 Axis built-in 100mm Dome Housing
High Resolution Color for Crisp,
Clear Video
ㆍ
Progressive image capture
ㆍ
690TVL Effective
Day & Night
The camera identifies whether it is day or night
and automatically switches to the appropriate
mode, depending on its environment. By day,
the camera switches to color mode in order
to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture
definition.
High Sensitivity for low-light
images
The built-in high sensitivity
PIXIM SEAWOLF Sensor enables
a clear image even at 0.1Lux
DNR (Digital Noise Reduction)
The amount of low illuminance noise has
been significantly reduced, and the signal
to noise ratio (S/N ratio) as well as horizontal
resolution, have been improved resulting in
a clear and sharp image image even in
low light.
OSD Control by coaxial cable via
pelco coaxitron
■
Features Warning
■
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period,
a fire may be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.