Clint CT4
|
User Manual
Clint CT4
|
User Manual
Page
|
5
Page
|
6
English
English
Once CT4 is properly connected to TV and antenna cable, you need to power it
ON.
When power ON CT4 for the first time, or when doing a factory reset of the CT4,
it will show the “First Time Installation” screen and guide you through the channel
search procedure.
PS: If you don’t see the installations screen on your TV, please make sure that the
HDMI cable is properly connected and your TV has been switched to the correct
HDMI port (HDMI source). For changing the Input Source on your TV, please study
the user manual for your TV.
NOTE: Since channel search might be different from each Country, it is important that you choose the
correct Country of where the CT4 is actually being setup and used.
NOTE: If you search TV channel from Cable TV (DVB-C), you might need to know the Search Data for
your TV provider like Frequency, Symbol rate, QAM etc. Please consult your TV provider.
(This is however not needed in all Countries.)
4. First Time Installation
Setup and installing the TV channels (Channel Search)
1. HDMI compatible output. Here you connect your TV. HDMI cable is included.
2. RF-In (Antenna Input). Here you connect the antenna cable. CT4 support
signals from your own antenna (DVB-T/T2) or signals from your cable TV
provider (DVB-C).
3. Common Interface. Here you can insert your CI or CI+ module and smart card
for use with pay-tv channels.
4. DC-In. Here you connect the Power Supply. AC/DC power supply is included.
5. ON/OFF switch.
6. USB ports (USB 2.0). USB ports are to be used for Software updating or Media
Playback. For Media playback, you can connect external USB hard drives or
USB memory sticks, that contain your media files.
3. CT4 and it’s I/O connectors
How to setup and connect your CT4
1
2
5
6
3
4
Summary of Contents for CT4
Page 1: ......
