Clinical Health Services TENS 3N1R Instructions For Use Manual Download Page 10

10

known, stimulation should not be applied across your 

head, and electrodes should not be placed on opposite 

sides of your head.

6)  The safety of electrical stimulation during pregnancy 

has not been established.

7)  You may experience skin irritation or hypersensitivity 

due to the electrical stimulation or electrical conduc-

tive medium (silica gel).

8)  If you have suspected or diagnosed heart disease or 

epilepsy, you should follow precautions recommended 

by your physician.                                                      

9)  Caution if you have a tendency to bleed internally, e.g. 

following an injury of fracture.

10)  Consult with your physician prior to using the device 

after a recent surgical procedure, because stimulation 

may disrupt the healing process.

11)  Caution if stimulation is intended to be applied over 

the menstruation or pregnant uterus.

12)  For single patient use only.

13)  This stimulator should not be used by patients who is 

noncompliant and emotionally disturbed including 

whom with dementia or low IQ.

14)  The instruction of use is listed and should be obeyed; 

any improper use may be dangerous.

15)  Rare cases of skin irritation may occur at the site of the 

electrode placement following long-term application.

16)  Do not use this device in the presence of other equip-

ment which sends electrical pulses to your body.

17)  Do not use sharp objects such as a pencil or ballpoint 

tip to operate the buttons on the control panel.

18)  Check the electrode connections before each use.

19)  Electrical stimulators should be used only with the 

electrodes recommended for use by the manufacturer.

2.2.4 Adverse Reactions

User manual for R-C3 V1.0 zkg.indd   10

User manual for R-C3 V1.0 zkg.indd   10

2020/7/28   11:11:56

2020/7/28   11:11:56

Summary of Contents for TENS 3N1R












































Reviews: