AIR-CONDITIONERS
P
ag
e
www.
YHFRQDFRP
3.
4
- FASTENING
The Compact unit should be secured
by the clips
.
.
3.
5
- CONDENSAT
E DRAIN
The
Climma Compact unit will extract a significant quantity
of moisture from the air, and this must be disposed of by
means of a gravity condensate drain. This drain can either
be to the bilge or to a sump with float-switch and pump.
The condensat
e drain
fittings provided are for
5/8" ID hose.
Do not use smaller diameter
mm on the
hose.
.
Each unit is e
quipped
with two out-
lets, as you can see in the picture
above
.Either one or both drains may be used
.
Condensate drains should ideally make a vertical
o
rientation as soon as possible after the pan fitting.
If both drains are to be used, they should be joined
together at a point lower than the drain pan.
Do not make more than one "U" trap in the condensate
be
drain as this can lead to a pneumatic lock that will
prevent the drain from functioning
.
DO NOT lead condensate drain directly overboard.
This can lead to the ingress of potentially lethal fumes
from
exhaust emissions
, etc
.
5
efer to the safety regulations
UHOHYDQWWR\RXU
JHRJUDSKLFDODUHD
NEOPRENE
3 INSTALLATION OF THE COMPONENTS
Figure 1.8
Dis 2.8
Figure 2.8
