5
Humidity measuring unit CMG 100
The units are shipped in sturdy
transport packaging. Check the
unit immediately after delivery and
make a note of any damage (please
take photos of the damage) or
missing parts on the delivery note.
Inform the forwarding agent and
contractual partner.
Please keep the packaging safely for
any returns.
Claims under guarantee made at a
later date will not be accepted.
5.0 Transportation and
packaging
3.0 Intended use
The product is used for non-invasive,
digital humidity measurement. It
is ideal for measuring the moisture
content of concrete, wood and
other building materials. The unit
can be used to check whether the
surface is ready for painting or
coating. Large surfaces can also be
measured quickly and effectively
using the signal function. The user
can concentrate on the object
being measured without having to
constantly read the measured values
on the display. The unit beeps when
the humidity level exceeds the limit.
The limit value is adjustable. The unit
offers a wide measuring spectrum
with a measuring depth of about
20 - 40 mm and has a display for
min/max values and for low battery.
The unit is powered by a 9 V block
battery. It also has an automatic
switch-off function.
For safety and approval reasons, you
must not convert and/or modify
the product. If you use the product
for purposes other than those
described above, the product may
be damaged. In addition, improper
use can cause hazards such as short-
circuits, fire, etc. Read the operating
manual carefully and keep it in a
safe place. Only pass the product on
to third parties together with the
operating manual.
The product complies with the legal,
national and European requirements.
All company names and product
designations contained herein
are trademarks of their respective
owners. All rights reserved.
2.0 Guarantee
As a prerequisite for any warranty
claims to be considered, it is
essential that the ordering party or
its representative completes and
returns the "certificate of guarantee"
to Climia Intakt GmbH at the time
when the units are purchased and
commissioned.
The guarantee conditions are
listed in the "General terms
and conditions of business and
supply". Furthermore, only the
parties to a contract can conclude
special agreements beyond these
conditions. In this case, contact
your contractual partner
in the first instance.
Disposal of packaging
All products are packed for
transport in environmentally
friendly materials. Make a valuable
contribution to reducing waste
and sustaining raw materials. Only
dispose of packaging at approved
collection points.
Disposing of the units and their
components
Only recyclable materials are used
in the manufacture of the units and
components.
Help protect the environment
by ensuring that the units or
components (for example batteries)
are not disposed of in household
waste, but only in accordance
with local regulations and in an
environmentally safe manner, e.g.
using authorised disposal and
recycling specialists or council
collection points.
4.0 Environmental
protection and
recycling
