Climer HTM EVI SERIES, Installation And User Manual

Page: 7 / 26

INSTALLATION AND USER MANUAL
HTM-24E
7
V0REV5ES1218
9. Pre-load coolant
10. Hydraulic installation
11. Electric installation
12. Commissioning
13. Adjustment of refrigerant load
5. THERMODYNAMIC SOLAR PANELS INSTALLATION
1. Site selection
The choice of the installation site of thermodynamic panels is a key factor in the final
performance of the heating module. For this reason, we recommend to follow the indications in
order to achieve the best performance:
- South orientation is indeed the best to take the maximum advantage of solar
radiation. Panels may also have other orientations, but northerly orientation is
the worst to receive solar radiation.
- Inclination: The minimum inclination of the panel is 15 º in order to ensure the
correct evaporation of the coolant. It is recommended to install the panel with
an inclination between 45º and 90 º.
- Orientation: It is possible to install the panel both in vertical or horizontal
position
When the panel is installed in vertical
position, always the inlet and outlet
connection has been at the bottom. (It is not
allow to install the reverse)
If the panel is installed at horizontal
position, it is recommended to install pair of
panels confronted for having less piping
towards the distributor.
1700
800
1700
800
1700
800
1700
800
1700
800
1700
800