STEEL MOUNTING
Torque Range:
75 to 90 ft-lbs
(100-120Nm)
* Use tapered washer with I-beams
that have tapered
fl
anges.
.75”
(6mm)
min
drill 5/8” (16mm)Ø
3”(76mm)
min fr
om an
y edge
Lock Nut
5/8” Lock
Washer
5/8”-11x4”
Hex Bolt *
5/8”-11
* For steel applications a grade 5, grade 8 (or equivalent) bolt no
shorter than 4” (100mm) with a locking nut and washer must be
used. Swivel anchor must be
fl
ush with steel surface. A 16mm
bolt of equal strength may be used in place of a 5/8”-11
for metric applications.
1. Use a proper drill and bit for steel.
2. Drill a 5/8” (16mm) hole no less than .75” (6mm) deep 3” (76mm) away from any edge.
3. Hole must be straight and perpendicular to surface.
4. Hole must be free of debris.
Summary of Contents for SWY100N-MTU
Page 10: ...NOTES ...
Page 11: ...NOTES ...