Climax VM2350, Operating Manual

Page: 53 / 88

P/N 89817, Rev. 1 Page 41
To solve mechanical faults, a complete part list and assembly drawing is supplied
with the operator's manual in
Appendix A
.
T
ABLE
5-2. T
ROUBLESHOOTING FOR POSSIBLE FAULTS
Possible fault Operating or maintenance error Recovery of fault
Machine does not start
Power supply line is not connected
Make sure that power supply line is
plugged in
Default in power source
Check energy source (fuses, plugs,
connections, air pressure, etc.)
Only for the electric drive: Machine over-
loaded. The heat protection is activated.
Let the machine cool down. As soon as
the heat protection of the electric drive
is deactivated, let the machine run at
high speed to cool down through its
ventilating system
Clean the ventilating slots if necessary.
Only for the pneumatic drive: Machine has
been run in cool environment and the sup-
ply lines are iced.
De-ice the supply lines.
Grinding pressure cannot
be activated
Bracket is not clamped on machine arm Bracket must be clamped.
Machine vibration during
operation
Grinding pressure exceeds 300 N (work-
ing range of spring) i.e. the indicator for
grinding pressure is already right down its
fixed stop
Make sure that grinding pressure does
not exceed 300 N.