Climax VM2150 Series, Operating Manual

Page: 25 / 76

P/N 90418, Rev. 1 Page 13
3 SETUP
IN THIS CHAPTER:
3.1 R
ECEIPT AND INSPECTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
3.2 S
ELECTING TOOLS AND PREPARATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
3.2.1 S
ELECTING TOOLS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
3.2.2 P
REPARING TOOLS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
3.2.3 P
REPARING THE MACHINE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
This section describes the setup and assembly procedures for the VM2150 globe
valve grinding machine.
3.1 R
ECEIPT AND INSPECTION
Your CLIMAX product was inspected and tested prior to shipment, and packaged
for normal shipment conditions. CLIMAX does not guarantee the condition of
your machine upon delivery.
When you receive your CLIMAX product, perform the following receipt checks:
1. Inspect the shipping containers for damage.
2. Check the contents of the shipping containers against the included invoice
to make sure that all components have been shipped.
3. Inspect all components for damage.
Contact CLIMAX immediately to report damaged or missing components.
NOTICE
Keep the shipping container and all packing materials for future
storage and shipping of the machine.
The machine ships from CLIMAX with a heavy coating of LPS 3. The recom-
mended cleaner is LPS PreSolve Orange Degreaser. All parts must be cleaned
before use.
The machine and accessories are delivered in high-quality, durable carrying cases
with foam inlet for safe transportation and storage (see Figure 3-1 on page 14
through Figure 3-9 on page 18).
To protect the equipment, the cases should always be locked during transportation.
To avoid an uncontrolled opening of the case, the locks are firmly tightened. It is
recommended to push the case’s cover down to get the case easily opened.
Even if the case provides a perfect protection of the equipment, any shocks and
collisions should be avoided.