Climax Hybrid-Panel Series User Manual Download Page 41

Page: 41 / 110

Step 11.

Learn in the sensors you have entered rules for according to

5.1.1 Add Sensor

<NOTE>



Learn rule function is only used to pre-assign area and zone number to sensors before

learning. To add senor to control panel, you still need to follow the instruction in

5.1.1

Add Sensor

to complete the learning process.



Backup Device List to Learn Rule

You can choose to import learn rule from current learnt in ZigBee devices

Step 1.

Click

―Backup Device List to Learn Rule‖.

Step 2.

Click OK to confirm.

Step 3.

The Learn Rule page will be updated with new rules according to current ZigBee device

list information. Shutter Control device and IP Camera will not be included.

Summary of Contents for Hybrid-Panel Series















































































































Search results

Summary of Contents for Hybrid-Panel Series

Reviews:

Related manuals for Hybrid-Panel Series

Brands by name

Popular brands

Climax Hybrid-Panel Series, User Manual

Search results

Summary of Contents for Hybrid-Panel Series

Reviews:

Related manuals for Hybrid-Panel Series

Brands by name

Popular brands