Climax H&S BOILER GUN BG22, Operating Manual

Page: 30 / 94

Page 18 BG22 Boiler Gun Operating Manual
3.5 M
OTORS
The BG22 Boiler Gun is powered by either a pneumatic
motor or an electric motor. The following subsections
explain how to set up each for operation.
3.5.1 Pneumatic motor
Do the following to prepare the pneumatic motor for
use (See Section 2.2 for controls):
1. Connect the air supply line to the in-line oiler/
filter end of the air hose assembly with the uni-
versal coupler. Secure with the lock pin.
2. Connect the air hose assembly to the pneumatic
drive motor using the quick disconnect coupler.
3.5.2 Electric motor
Do the following to prepare the electric motor for use
(See Section 2.2 for controls):
1. Verify that the direction selector is set to for-
ward.
2. Plug the drive into an OSHA certified power
source or consult a licensed electrician for addi-
tional power supply options.
3.5.3 Cordless electric motor
Do the following to prepare the cordless electric motor
for use (See Section 2.2 for controls)
1. Fully charge the battery packs using the battery
charger.
2. Install the battery on the bottom of the motor,
fully locking it into place.
F
IGURE
3-10. U
NIVERSAL COUPLER
(
TOP
)
AND QUICK
DISCONNECT
(
BOTTOM
)
F
IGURE
3-11. M
OTOR DIRECTION CONTROL SET TO FORWARD